$14.00 - $16.00 / piece
- Color Temperature(CCT):2200K-6500K Tunable
- Lamp Luminous Efficiency(lm/w):95
- Color Rendering Index(Ra):80
- Light Source:SMD5050 & SMD3030 Epistar LED
- Support Dimmer:Yes
- Lighting solutions service:Smart Lighting Control Solutions
- Application:Home lighting, party, bar, villa, hotel, etc., Lighting Decoration for Residential and Commercial Use
- Design Style:Modern
- Lifespan (hours):50000
- Working Time (hours):50000
- Product Weight（kg）:0.4
- Input Voltage(V):100-240Vac
- Lamp Luminous Flux(lm):800-850
- CRI (Ra>):80
- Lamp Body Material:Die-cast Aluminum + PC Cover
- IP Rating:IP20 Indoor Use
- Model Number:GL-D-004P
- Place of Origin:Guangdong, China
- Brand Name:GLEDOPTO
- Install Style:Embeded
- Switch Type:Wireless Controlled by Voice or App
- Diver Type:External Isolated LED Driver
- Controlling Protocol:ZIGBEE 3.0 & 2.4G RF
- Compatible ZLL Gateway:(P)hilips (H)ue, Am(a)zon Echo, (I)kea Tradfri, (S)martthings, etc.
- Remote Distance:≤30Mtr
- Work Temperature:-20°C~60°C
- Cut-hole Size:D100-110mm
- Net Weight:0.4KG
- Certificate:CE RoHS EMC LVD RED
Lighting Features of RGB+CCT ZigBee3.0 LED Ceiling Light
ZigBee3.0 Lighting Control Features
You do not have to remember to turn off the bulb before you go to sleep. The sleep timer will automatically turn off the light after the preset time has elapsed per your settings. You also can set a wake-up time with your favorite color.
>Voice Control & Remote Control
The smart bulb Compatible with Alexa. It can help you save time and it is convenient to your life through voice control. The light works with your existing Wi-Fi or cellphone traffic. You can control your bulb no matter where you are. You can turn it on or turn it off without leaving your bed.
MORE SMART HOME CONTROLLING FEATURES
both the RF Remote and ZigBee.
>Powerful MESH feature
Thanks to the powerful new Silicon Labs chipset being used, the Pro version ZigBee lights and controllers are now with much more
powerful MESH function. It will allow you to control as many smart lights together or individually after connected with the
ZigBee3.0 bridge. One bulb can read and synchronize the same lighting mode from another one, so to make all the lighting changes
into the same status, best for long distance & large area lighting project.
TO CONTROL GLEDOPTO PLUS/PRO WITHOUT A ZIGBEE HUB CONNECTE
>Or if you are putting these lights somewhere outside of the WiFi coverage, e.g. a camper, backyard, garage workshop, etc., you can use the RF Remote Controller directly, no need to find to link to a ZigBee bridge.
>Auto sync & transfer.
This is the best feature for 2.4GHZ RF Remote Controlling design, it's most suitable for long distance and large area lighting application. Your RGBW or RGB+CCT color LED lights can receive the controlling signal sent from the handheld or wall mounted remote control, as long as the distance between two lamps is within 15mtr to 20mtr, the first lamp can send the signal automatically to the second lamp, and then to third lamp, and so on, until all lamps totally synced and changing the lighting
color or modes all the same at the same time.
Other Similar Indoor Voice APP Control LED Lighting Bulbs as Below ...
Install & Control the Indoor RGBW/CCT ZigBee Light Link (ZLL) LED Down Light
1.Turn off the Power.
2.Plug in the bulb.
3.Now you can connect it with the gateway.
Connection with Gateway:
1.Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, switch off/on the gateway and try again or
3.The Gateway found your device and you can assign it to the different rooms/zones/groups.
4.Now you can use the device.
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.
PLUS Version ZigBee LED Downlight Controlled by 2.4G RF Remote Control
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 1000pcs
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly, please let us know your requirements or application.
Secondly, we'll make quotation according to your requirements or our suggestions.
Thirdly, customer confirms the samples and places deposit for official order.
Fourthly, we arrange the production.
Fifthly, customers make balance payment for the order, and we arrange shipment once the payment received.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-3 years warranty for our products.
Q8: How to deal with the faulty?
A: Firstly, our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity.
For large defective products, we can arrange to repair them and resend them to you, or we can discuss the solution
including re-call according to actual situation.